|
The
Francis Kanoi Analysis of the Provisional Population Totals of the Census of India-2001
|
Installation Procedure |
A] SYSTEM REQUIREMENTS:
The software is developed in Visual Basic which, to work efficiently,
is demanding in terms of hardware. Ideally, you should work with the latest of
the Pentium processors with a 32 MB RAM. Before installing the Census of India
2001 software, you must ensure that the following hardware and software requirements
are met.
Operating system |
Windows 95 / 98 / NT (With
Internet Explorer 5.0 ) |
Processor | Pentium-I
or higher | RAM | 16
MB. Preferably 32MB |
Hard disk space | 50 MB |
Display | SVGA colour
monitor | Disk drive | CD-ROM
drive | Pointing device | Microsoft
mouse or compatible pointing device |
To install the software,
which has been developed on Visual Basic and Access, the system
should have Windows 95/98 with atleast Internet Explorer 4.02
SP2 or a later version or any latest Windows edition.
In case the minimum configuration is not found, then the following error
may come at the time of installation i.e. in Step 6, when you click on
the Computer Symbol: "429-ActiveX component can't create object / This
program has performed an illegal operation". To overcome this
problem, you would need to first update your system with Internet Explorer 5.0
and then start installing the Census 2001 software.
For your convenience, we have included the Internet Explorer
5.5 software in the CD, in the IE5setup directory.
To update Internet Explorer in your system just run the
\ IE5setup \ IE5setup.exe from the CD. This will update
your system. |
B] Installation Procedure
The entire installation
procedure will take roughly 10-15 minutes.
The steps
to be carried out to install the software in your machine, are as follows :
Step 1 : Insert the CD received from Francis Kanoi
into the CD drive. Step 2 : Click <Start> from the Windows
main screen Step 3 : Click <Run> Step 4 :
The following window will appear In the space provided, type
in the following : d:\setup.exe.' d ' refers to the source drive (CD drive). If
' d ' is not your source drive, please type in the correct CD drive name. Then
click <ok>.
Step 5 : Click <ok>
on the window titled "FK Census of India -2001".
Step 6 : The default directory name will be C:\CensusIndia.
At this point, the screen will carry a window similar to the
one below :
To change the directory name or
the hard disk drive name, click on the <change directory>
button. Ideally, however, you should try and avoid changing the directory name.
But the name of the hard disk drive can be changed, from C to D or E, as the case
may be.
Step 7 : Then click on the button at the top left corner
of the window, which carries a picture of a computer. This
will initiate the installation process, which will take about
10-15 minutes. At the end of the installation, the
following screen will be displayed.
Step 8 : Type in the User Name and the User Password. Please keep in mind the following
while entering the User Name and Password. 1] The maximum length
of the name can only be 15 characters. 2] Maximum length of the password
can only be 8 characters. 3] The password is case sensitive. Once the
User Name and Password are entered, click on <continue>.
Step 9: The installation procedure will now
display a 9-digit Set up Code, for e.g. 569-384-279. Please note down
the number given by your computer and then click on <finish>.
Step 10 : Wait for the following box to be displayed on the screen,
then click on <ok>. This will clear the installation
screen and return you to the Windows main screen. |
C] To access the
software, an installation code has to be obtained from us.
Please e-mail / fax the 9-digit setup code
to us (Refer step 9 of the installation procedure).The installation
code will be emailed / faxed to you within about 20 minutes
time.
While sending the set-up code,please also
send all your contact details,Please also mention your customer
ID number in the email,to enable us to process the request.
|
D] To register the Installation Code in your computer,
please follow the steps given below:
Step 1 : Insert the CD-ROM in the CD-Drive. Step 2 : Click on the <start> button
from the Windows main screen. Step 3 : Click on the
<program> option.
Step 4 : Click on the <FK
census of India - 2001> option Step 5 : Enter the installation code in the
text box provided. This will take you to the opening screen of the software. This
requires to be done only the first time you are entering the software.
Step 6 : The User Name and Password have to be entered, exactly as entered
in Step 8 of the installation process. These must be entered each time
the software has to be used. |
E] Use of the software on
subsequent occasions : 1. The steps mentioned in section D above,
except for step 5, must be followed each time you need to use the software.
2. The CD must be kept inserted in the CD drive whenever you
want to use the software and it must remain there until you
exit from the software.
Important
Please note that only two installation
codes will be provided per CD, one for a laptop and one for a desktop.
Therefore, care must be taken to install the software in a computer in which you
plan to have the software, on a more or less permanent basis. Requests
for additional codes will not be entertained | |
F]
How to access the software through the CD drive in the server
*
The Census of India 2001 software has been developed for installation
in a stand alone machine only. However, you could access
the software in a LAN by carrying out the following steps:
1. Insert the CD in the CD drive of
the server. *
2. After that, the following should
be done on the server (System A).
The CD Drive of the server has to be shared. If this has not
already been done, please carry out the following instructions:
i) Double click on <Mycomputer>
of the server. Choose the CD Drive and right click on it Select
<Sharing > from the menu ii) A window will appear - Choose
<Shared as> the option and give the CD Drive name (as in
server) as the shared name and click <Apply>.
For e.g. if the CD Drive
in the Server node is G: then the Shared name should also
be G:
3. Then the following should be done
on the machine that you want to access the software on, i.e.
the node (System B).
a) Right click on the Network Neighbourhood (icon seen
on the Desk Top) Choose <Map Network Drive>
b) A small window will appear on the screen. Select a drive
to map the shared CD drive in the server.
c) In the same window, in the space given alongside <
Path >, type the server name and the shared name, For
e.g. if the Server name is "NTServer" and
the Shared name is "G", then the path will
be \\ntserver\G. Click < Ok > after typing
this. You will now be able to access the CD drive in the server.
Now, you can install the software in
this system (system B) by following the steps outlined in
the installation procedure.
However, please note the following:
1) The software can be accessed only in the node (System
B) in which it has been installed.
2) The CD drive should be mapped, each time, as it was mapped
at the time of installation. (i.e. steps 3 a,b & c above).
3) The CD should be kept inserted in the mapped drive (System
A), whenever the software is in use.
* The CD drive could
be in the server or in any system connected through a network
to the system on which the software is being installed.
| | |